How to Calculate Takt Time: Formula, Example, Calculator
Takt time shows how often one unit has to be completed to meet customer demand. Below you will find the formula, how it differs from cycle time, a worked example on a line of four stations and a calculator you can try with your own numbers.
6 min readUpdated 19 November 2026
What is takt time?
Takt time says how often one unit has to be completed to meet customer demand. It does not show how fast the line can run but how fast it has to run, which is why it is calculated and not measured.
The word comes from the German “Takt”: beat, rhythm. With a takt time of 45 seconds, one good unit has to leave the end of the line every 45 seconds. Slower misses demand; faster builds stock.
How to calculate takt time
Takt time = Net production time ÷ Customer demand
Time and demand must describe the same period: the time of a shift is divided by the demand of a shift, the time of a day by the demand of a day. Convert the time to seconds to get the result in seconds.
| Item | Part of net production time? | Why |
|---|---|---|
| Meal and tea breaks | No, taken off | They are planned; nothing is expected to be made |
| Planned meetings, cleaning, planned maintenance | No, taken off | They have a fixed place in every shift |
| Breakdowns and waiting for material | Yes, left in | They are unplanned; takt time must not hide the loss |
Demand is the number of good units the customer wants. The quantity in the production plan, the capacity of the machine and last month’s output are not demand.
Takt time calculator
Enter the numbers of your own shift; the result updates as you type. The values it opens with belong to the example below. If you put the measured cycle time of your slowest station in the last field, the calculator also shows whether that pace meets demand.
Takt time
45seconds
- Net production time
- 450 minutes
- Pace required
- 80 units/hour
- Capacity at this cycle time
- 529 units
The cycle time is longer than the takt time: at this pace the shift ends 71 units short of demand.
Worked example
An assembly line with four stations takes 30 minutes of planned breaks in a 480-minute shift. The customer wants 600 units per shift.
| Step | Calculation | Result |
|---|---|---|
| Net production time | 480 − 30 | 450 minutes |
| In seconds | 450 × 60 | 27,000 seconds |
| Takt time | 27,000 ÷ 600 | 45 seconds |
| Pace required | 3,600 ÷ 45 | 80 units/hour |
One unit has to leave the line every 45 seconds. Now look at the measured cycle times of the stations:
| Station | Cycle time | Against takt time |
|---|---|---|
| 1 | 36 seconds | 9 seconds to spare |
| 2 | 42 seconds | 3 seconds to spare |
| 3 | 51 seconds | 6 seconds over |
| 4 | 40 seconds | 5 seconds to spare |
A line runs at the pace of its slowest station. Station 3 gives one unit every 51 seconds, so the shift ends with 27,000 ÷ 51 = 529 units, 71 short of demand. The other three stations being fast does not close that gap; it only piles up work in progress in front of station 3.
When demand rises
If the customer starts asking for 720 units per shift, the numbers for the same line change:
| Demand of 600 units | Demand of 720 units | |
|---|---|---|
| Takt time | 27,000 ÷ 600 = 45 seconds | 27,000 ÷ 720 = 37.5 seconds |
| Pace required | 80 units/hour | 96 units/hour |
| Minimum operators | 169 ÷ 45 = 3.76 → 4 | 169 ÷ 37.5 = 4.51 → 5 |
The line is the same line, yet three of its four stations are now over takt time. The options are clear: spread the work over five stations or add working time. If the same 720 units are spread over two shifts, net time becomes 900 minutes and takt time is 54,000 ÷ 720 = 75 seconds.
Takt time vs cycle time
The two are often confused because both are “seconds per unit”. The difference is where they come from: takt time comes from the customer, cycle time from the station.
| What it tells you | How you get it | In the example | |
|---|---|---|---|
| Takt time | The pace demand asks for | Net production time ÷ demand | 45 seconds |
| Cycle time | How long the station takes to complete one unit | Measured at the station | 36 to 51 seconds |
| Total work content | All the labour that goes into one unit | The sum of the cycle times | 169 seconds |
The rule is simple: the cycle time of every station should equal the takt time or be slightly shorter. If it is longer, demand is not met. If it is much shorter, the station waits or makes more than is needed.
On the floor, takt time earns its keep in three places:
- The hourly target. A takt time of 45 seconds means 80 units an hour. Write target and actual on the board at the head of the line every hour, and a gap shows within that hour instead of at the end of the shift.
- Station design. When you set up a new line, you split total work content into pieces that fit within takt time; the number of stations follows from that.
- Capacity decisions. Comparing takt time with the cycle times shows whether rising demand is met by moving work, by a new station or by a second shift.
When cycle time exceeds takt time
Before you turn to overtime, work through these in order:
- Break the work into elements. Write down the work of the station that is over, step by step, and time each step. Seconds that add no value, such as walking, searching, reaching and waiting, are the first to go.
- Move work to a station with time to spare. In the example, moving a 7-second step from station 3 to station 1 gives 43, 42, 44 and 40 seconds. Total work content is still 169 seconds, but no station is over 45 seconds any more.
- Check the number of operators. The minimum number of operators is total work content divided by takt time: 169 ÷ 45 = 3.76, so 4 operators. If the result is more than the people you have, balancing is not enough; you have to reduce the work content or add a station.
- Make the new split the standard. If the step that moved is not written into the work instruction, the line drifts back to its old arrangement within days.
Common mistakes in the calculation
- Taking unplanned stops off the time. Deduct breakdowns up front and takt time gets shorter, but the loss becomes invisible. Stops are tracked in OEE, not in takt time.
- Mixing periods. Dividing a day’s demand by the time of one shift makes takt time look shorter than it is.
- Comparing takt time with the average cycle time. In the example the average is about 42 seconds and nothing seems wrong; yet the 51-second station sets the pace of the line.
- Leaving no margin. If cycle time equals takt time exactly, the first small hiccup misses demand. Leave a few seconds for defects and small stops.
- Not recalculating when demand changes. Takt time is not a fixed property of the line; it changes whenever demand or working time changes.
Measuring cycle time properly
Takt time is calculated at a desk; the cycle time it is compared with is measured on the floor. A single stopwatch reading misleads: the operator knows they are being watched, and the reading may fall on a good moment of the day. Time at least ten cycles, repeat at different hours and with different operators, and note unusual cycles together with their causes.
Frequently asked questions
What does takt mean?
“Takt” is German for beat or rhythm. Takt time is the beat of customer demand: the time within which one unit has to be completed for demand to be met.
How is cycle time calculated?
Cycle time is measured, not calculated: it is the time from one unit being finished to the next one being finished. For a quick check you can divide the net working time of a period by the units made in it; that gives an average which includes the stops.
What is the ideal cycle time?
It is the shortest cycle time a station can reach when it runs without losses, and it is used in the performance component of OEE. Takt time comes from demand; ideal cycle time comes from what the station is capable of.
How often should takt time be updated?
Whenever demand or working time changes: a new order period, a change in the number of shifts, a change in breaks. Where demand fluctuates, a weekly or monthly calculation is common.